Miller and the Somons

Check the options of the wire mil and slurry according to the brand or the work principle. HIWIN, GTEN, Thomson, THK, Far East and trapez products are presented on six separate pages.

Where do you start the selection of the mile and slum?

The wire mile is the machine element that connects between the turn movement and linear progress. The appropriate team is selected and the nominal diameter of the mile, the amount of progress per round, the geometry of the shell and the work circle of the axis are studied together. The rail and the cars are used to guide the load and the wire mile moves the axis. This task difference helps to determine which part will be renewed in the existing machine.

The difference between the six product groups

The HIWIN page includes the FSI, FSC and FSZ families; the GTEN page features different single and double shell arrangements; the Thomson page features metric flagship shell options. the THK section includes the measurements of the DIN family and the general range of other important families. the Far East group offers the nominal diameter and progress combinations selected with the IM-VM stock definitions. the Trapez miller is assessed by the working principle separately from the ball shell.

The brands or groups on these cards are not a direct equivalent list. The length of the two products with the same nominal diameter and progress can be different, the flange holes, the lubrication connection or the precision. If a new product is sought instead of a old piece, the first full code is compared, then the measurement draw. If the code is not read, the sample begins with the photo and measurements.

Difference between the diameter, hatve and progress

The nominal diameter describes the size of the body of the wire. The wire represents the axinal distance between the neighboring teeth, and the progress means the movement in a full round. A multi-start wire with a single-start wire can be different in this regard. Changing the progress setting of the control system without a full product definition or ordering a different team may not give the right result.

The movement that a high-progressed option creates in the same motor cycle with a small advanced option is different. The strength, the drive and the working frequency as much as the expected speed should be indicated. The extension of a mile diameter does not solve each design problem alone; free size, bed layout, critical rotation and mechanical settlement are assessed together.

A bit of life or a trapez life?

The movement in the bullshit is provided by the bullshit circulation in the shell. The trapez shell has a swing contact between the shell and the shell. This difference affects the swelling, the empty behavior, the maintenance approach and the choice of the drive. It should be cleared whether the application wants a constant positioning, interim setting or force application. It should not be assumed that each trapez order is locked on its own.

How do technical drawings be studied?

You can grow by clicking on the images on the subpages, you can open the local PDF files given to the relevant family. The manufacturer drawings are protected by their original dimensions; a load value that is not read or not verified will not be re-created. The scope of the documents containing the selected page is explained. The manufacturer's current reward for full order, the desired variance and the scope of parts are also verified.

Offer and end processing information

When you want a offer, share the total length of the mill, the straw, the end processing picture and the details of the piece. specify whether the mill is alone, the unprocessed mill or the ends are prepared. the caplin and bed dimensions should be added to the drawing. the method of holding the load in the work axes of the dish is also included in the project assessment. This information makes the product's order scope clear.

The maintenance and renewal approach

The damage in the old piece can be caused by lack of lubrication, contamination or equalization error. These causes should also be studied when the new piece is selected. The choice of lubricant and maintenance range are done according to the instructions of the manufacturer. The compatibility of the shell group with the new shell is as important as the cleansed and correctly harmonized work of the mill. In a maintenance process, not only the visible shell part, but the connections around the axis are also controlled.

Interested Machinery Components

The whole movement group. Miles of beds and Linear rail and cars You can review the sections together. Minyatur rail and car products are located within the relevant brand pages. If you need a motor axis on the ready body Mile Moving Systems You can go to the group. With Advanced Engineering, you can request technical assessment to determine the appropriate product family by sharing your existing measurements.