Distant East and Miles

The product family for the Far East Wire Miles and Somons, the size drawings and the application selection information.

The far-eastern wire miles and slums are assessed by diameter and advance combinations for general-purpose machine axes. Here the IM-VM codes are Advanced Engineering stock definitions; it is not the manufacturer's brand. The manufacturer of the product to be supplied during the preparation of the offer, the shape of the slums, the verified measurements and the delivery range are also indicated. A stock definition does not indicate that all similar appearance products in the market are in the same characteristics.

Options and progress

The following table lists the nominal combinations selected from the standard swing groups with the right tooth seen in the source. For example, IM-VM-1605 code is a local stock definition used for the nominal diameter of 16 mm and 5 mm progress in a round. This definition does not include swing length, hole centers, ball diameter or load capacity. These measurements are controlled by the technical drawing of the supplied variance.

The different reversal element options with right and left tooth spots are listed separately in the source product family. The main table here covers the selected combinations of the right tooth group. If left tooth or metal reversal element is required, it should also be indicated in the demand. The existence of these differences in the same diameter and progress shows why ordering with a short code is not enough.

Verification of the size for spare parts

When looking for pieces instead of a existing shell, measure the outer diameter, the flange diameter, the total length and the connection holes. Also photograph the direction of the lubrication entrance and the spaces on the body. If the shell needs a processed mile, the rolling slopes and the caplin connection should be added to the drawing. Measure the nominal diameter of the mill only does not be enough to verify the conformity of a ready-processed team.

In the manufacturer and series changes, the load, life, axle space and accuracy values are not considered the same. Therefore, there is no uncertain dynamic load or sensitivity class written here. The first comparison is made in a nominal dimension; the order definition is completed through the technical document. The product appearance helps to recognize the family and may be similar in a number of nominal dimensions. The visual one should not be used as a proof of the size of a particular model.

Product family and technical selection table

What information should you share for the offer?

Set out the total length of the mill, the work strok and the end processing measurements by separating each other. The total length can also enter bed spots, the caplin connection and the safety shell teeth. Just reporting the distance of movement is not enough to determine the full length of the piece to be prepared. Transmitting the photo of the sample in your hand along with a measurable drawing reduces the possibility of misconduct, especially when adapted to the existing machine.

In addition to the mass to be moved, share the direction of movement, desired speed, drive, working frequency and environmental conditions. The axis of lifting the river is not equally assessed with a horizontal table. The mile diameter does not determine the capacity of transport alone; the free size, the layer layout, the structure of the slope and the work circle are studied together. The exact load values must only be taken from the technical documentation of the full model selected.

Things to take care of in the installation and maintenance

The fixed side bed, the support side and the body of the shell should be installed on the same axis. Trying to remove the shell error by over-tension of the connective cravings does not provide proper movement. Millin end processes are prepared according to the sizes of the bed, the lock shell and the caplin. The seating of the shell on the body with the bed shell tolerance is separately controlled; the first operation is done at low speed.

The type of lubricant and the range of renewal are determined according to the manufacturer's instructions, the working environment and the actual circle. The protection blindness and appropriate scatter solution are assessed in machines with slurry, dust or liquid. The bullying shell should not be removed over a mile without the appropriate transfer apparatus. The cause of damage to the old part during renewal should also be investigated; the problem of equalization or pollution should not be assumed solved only with the installation of the new shell.

Products and technical assessment

The full axis Miles of beds to guide the burden. Linear rail and cars You can check the section if you need a ready carrier body and drive unit Mills of Motion Modules The tasks of these products are different; while turning the vibration movement to the advance, the guidelines carry the geometry of the moving element. The correct solution is determined by assessing the whole axis.

Frequently Asked Questions

Is IM-VM a manufacturer brand?

Advanced Engineering is the stock definition. The manufacturer, the full model and technical acceptance requirements are also specified on the offer.

Can I use 1610 instead of 1605?

The move is different in the same engine cycle because the progress changes. the control settings and the entire mechanical selection should not be changed directly without re-evaluation.

WhatsApp ile ölçü ve teklif paylaşın ↗

All the mil and somun groups