GTA and Miles
GTEN Wire Mil and Smoothers product family, size drawings and application-based selection information.
GTEN slides and slides are a product group that should be studied according to different forms of connection and circulation arrangements. Here the family table, the manufacturer's measurement pages and the information required for the offer, which helps to distinguish the single and double slides options, is collected. The slides in the image is useful for the beginning; the exact selection, the full model code and the application's working conditions are made.
How to determine the family?
The manufacturer's document contains different families such as FSU, FDU, FSI, FDI and FSC. The one-and-double shell structure in FSU and FDU comparison; the shell arrangement is considered again in FSI and FDI comparison. The FSC family's own drawing and table is also checked. The presence of the families in a common mile diameter does not mean that the connection dimensions or load values are equal.The sign on the old shell in the spare piece request must be shared readily. If the code is deleted, the photo of the flange surroundings, cutting surfaces, holes and lubrication connection is taken. The total length of the shell is also measured; selecting the single shell that looks shorter instead of a double shell layout can change the starting and end positions of the axis. In the new shell design, the maintenance area around the shell should also be left.
Front load, emptiness and purpose of use
The equipment feed, the measurement arrangement and the behavior desired for the general purpose transport axis may not be the same. The axis vacuum expectation and the drive's vacuum return behavior are evaluated together. The pre-load information is part of the order definition; the double-summing appearance alone does not guarantee a certain pre-load value. The correct values are confirmed by the manufacturer's record of the chosen team.The local PDF contains original GTEN technical pages. The diameter, progress, external size and load information on these pages must be assessed within their own lines. The measurement in a family does not mean the ready stock for another family. In the Advanced Engineering offer, the range of parts, end processes and verified model are also indicated. In the price request, the millin must also be written that the ends are not processed or prepared.
Product family and technical selection table
| Family | The Difference / Difference | The priority control |
|---|---|---|
| The FSU | The only somon | The family painting |
| FDA | The double somun | Total of Somun |
| FSI | The only somon | The Family of Inner Circuit |
| FDI | The double somun | The whole of the mountain and the mountain |
| FSC | The separate geometry | Their own technical picture |
Original technical drawings and measurement tables
Technical drawings and measurements · source PDF page 4
Technical drawings and measurements · source PDF page 6
Technical drawings and measurements · source PDF page 8
Üreticinin güncel ürün bilgisi ↗
What information should you share for the offer?
Set out the total length of the mill, the work strok and the end processing measurements by separating each other. The total length can also enter bed spots, the caplin connection and the safety shell teeth. Just reporting the distance of movement is not enough to determine the full length of the piece to be prepared. Transmitting the photo of the sample in your hand along with a measurable drawing reduces the possibility of misconduct, especially when adapted to the existing machine.In addition to the mass to be moved, share the direction of movement, desired speed, drive, working frequency and environmental conditions. The axis of lifting the river is not equally assessed with a horizontal table. The mile diameter does not determine the capacity of transport alone; the free size, the layer layout, the structure of the slope and the work circle are studied together. The exact load values must only be taken from the technical documentation of the full model selected.
Things to take care of in the installation and maintenance
The fixed side bed, the support side and the body of the shell should be installed on the same axis. Trying to remove the shell error by over-tension of the connective cravings does not provide proper movement. Millin end processes are prepared according to the sizes of the bed, the lock shell and the caplin. The seating of the shell on the body with the bed shell tolerance is separately controlled; the first operation is done at low speed.The type of lubricant and the range of renewal are determined according to the manufacturer's instructions, the working environment and the actual circle. The protection blindness and appropriate scatter solution are assessed in machines with slurry, dust or liquid. The bullying shell should not be removed over a mile without the appropriate transfer apparatus. The cause of damage to the old part during renewal should also be investigated; the problem of equalization or pollution should not be assumed solved only with the installation of the new shell.
Products and technical assessment
The full axis Miles of beds to guide the burden. Linear rail and cars You can check the section if you need a ready carrier body and drive unit Mills of Motion Modules The tasks of these products are different; while turning the vibration movement to the advance, the guidelines carry the geometry of the moving element. The correct solution is determined by assessing the whole axis.Frequently Asked Questions
Is the GTEN linear rail in the same section with the GTEN wire mile?
No. This page covers miles and slums that turn the turn movement to linear progress. Ray and car groups are separate guide products.
Is double-summing more suitable in every application?
The space, the vacuum expectancy, the rigidity and the work circle are assessed together. The better performance result is not derived by movement from the number of shells alone.