Manual beding systems

Hand-moved shells and block bed and profile bed options for special power transfers to the project.

Check the products according to the mile series, the profile cut and the car structure. Manual bedroom does not provide motor drive alone or self-locking.

38x50 Profile Bed

38x50 Profil Yataklama için ürün yapısı, teknik seçim bilgileri, montaj önerileri ve teklif hazırlığı. Strok, yük ve uygulama koşullarınızı İleri Mühendislik ile…

İncele →

60x80 Profile Bed

60x80 Profil Yataklama için ürün yapısı, teknik seçim bilgileri, montaj önerileri ve teklif hazırlığı. Strok, yük ve uygulama koşullarınızı İleri Mühendislik ile…

İncele →

80x80 Profile Bed

80x80 Profil Yataklama için ürün yapısı, teknik seçim bilgileri, montaj önerileri ve teklif hazırlığı. Strok, yük ve uygulama koşullarınızı İleri Mühendislik ile…

İncele →

Ø12 Makaralı Blok Yatak

Ø12 Makaralı Blok Yatak için ürün yapısı, teknik seçim bilgileri, montaj önerileri ve teklif hazırlığı. Strok, yük ve uygulama koşullarınızı İleri Mühendislik…

İncele →

Ø20 Makaralı Blok Yatak

Ø20 Makaralı Blok Yatak için ürün yapısı, teknik seçim bilgileri, montaj önerileri ve teklif hazırlığı. Strok, yük ve uygulama koşullarınızı İleri Mühendislik…

İncele →

Ø4 Makaralı Blok Yatak

Ø4 Makaralı Blok Yatak için ürün yapısı, teknik seçim bilgileri, montaj önerileri ve teklif hazırlığı. Strok, yük ve uygulama koşullarınızı İleri Mühendislik…

İncele →

Ø6 Makaralı Blok Yatak

Ø6 Makaralı Blok Yatak için ürün yapısı, teknik seçim bilgileri, montaj önerileri ve teklif hazırlığı. Strok, yük ve uygulama koşullarınızı İleri Mühendislik…

İncele →

Ø8 Makaralı Blok Yatak

Ø8 Makaralı Blok Yatak için ürün yapısı, teknik seçim bilgileri, montaj önerileri ve teklif hazırlığı. Strok, yük ve uygulama koşullarınızı İleri Mühendislik…

İncele →

Ø8 Makaralı Kapalı Blok Yatak

Ø8 Makaralı Kapalı Blok Yatak için ürün yapısı, teknik seçim bilgileri, montaj önerileri ve teklif hazırlığı. Strok, yük ve uygulama koşullarınızı İleri…

İncele →

Ø4 Blok Yatak

Ø4 block the connection of the moving part in bed is assessed along with the narrow settlement area. The effect of a fled linked part according to the mile axis is...

İncele →

Ø6 Blok Yatak

Ø6 block beds and rollers alternatives should be read from the same model table. The location of supports, the available movement distance and the installation of the...

İncele →

Ø8 Blok Yatak

Ø8 blocks of the carrier's hole and contact surfaces connected to the bed are displayed in the assembly drawing. The movement will be able to hit the connections around the bed.

İncele →

Ø12 Blok Yatak

Ø12 block beds are important to place the guidelines in the same direction in a order used. If more beds will work together, the distance and the distance between them will be...

İncele →

Ø20 Blok Yatak

Ø20 block bed is assessed by the mile and rolling order given in the table. The mile support on the long movement line and access to the surrounding equipment are combined with the mile support and the mile support.

İncele →

The mechanical structure of this group.

The movement is considered by hand or by a special force transfer to the project in the beds of this group. The task of producing movement with the guidance task is separated from each other. The application design determines how the car will be kept in the position and how the movement will be limited at the ends. If the lock or brake option is requested, it should be indicated that it is a separate variant.

How to compare the product group?

The following product cards allow you to study the options that approach the same movement needs from different mechanical structures. The external size or serial name is not enough to make a choice alone. First describe the sizes of the part to be moved, the connection form and in which direction the force is applied during the movement. The moving mass includes the weight of the connection plate, the apparatus and the assistant elements as much as the piece. If there are multiple load conditions, it makes it more clear to determine the assessment to specify them separately.

Indicate the total and total length separately.

Net strok is the movement distance the car will use during the work. The total length of the product may be different due to the end connections and the carrier elements. Showing the end position with the beginning in a settlement draw is more explicit than just writing the total machine size. If end stopers, sensors or cable carrier are required, plan the area they cover. The support points of the main structure to be installed and the spaces assigned for service are assessed in the technical interview.

Connection and environmental conditions

The module or bedroom should be considered from which surface to the machine to be connected, along with the rigidity of the main shell. A properly selected product may not show the expected behavior on an inappropriate assembly surface. If there is a contact with the dust, dust, moisture and liquid, share this information. Protecting coverings and covers are considered according to the use environment. Access to maintenance and lubrication points should be placed in the design headquarters, as it will be necessary not only on the assembly day, but also during the later use of the machine.

Variant and delivery

There may be different plates, miles, rails or connectivity options within a product group. When examining technical tables, make sure the data belongs to which configuration. Don't move a value such as load capacity, speed or precision directly to different strok and assembly direction. Motor, driver, caplin, sensor, lock and special connectivity plates can also be added to the delivery range. Showing the necessary equipment in a single list makes it easier to evaluate the different parts of the offer together.

Preparation for technical meeting

Share the size of the upper table, the distance of the load from the center and the circle frequency are also effective in the selection. If you have a available system, you can add a measurable drawing or photo. If all the details in a new design are not yet clear, it is enough to explain the use scenario for the beginning. The final assembly measurements, the working conditions and the components to be delivered are clarified together with the technical assessment in the offer stage.

Compare the application.

When comparing multiple models, examine them all through the same work scenario. It can be misleading to compare only the product names without the use of the same load, the same strok and the same assembly direction. If a problem occurs in a existing system, describe where the problem occurs. Observations such as difficulty at the beginning of the movement, noise at a specific position, release on the table or unconnection due to the narrow area may indicate different issues. These observations alone are not a failure diagnosis; it helps to understand where the technical examination will begin. Showing the directions and reference surfaces in a measurable drawing, it makes it easy to evaluate the product's conformity to your machine.

Setting a list of offers

Write the pieces and measurements for each model in a separate line. If there are multiple axes, separate them with clear names such as X, Y and Z; specify which axes carry the other. If different strokes from the same product are requested, don't combine them under one total size. Add to the list whether the connector elements, special plates and assistant equipment are included. If you need to match the existing piece, also mark the uncertain places of the size. Such a request list makes it easy to compare both the alternatives and to clarify the supply scope before the offer.