The Role of the Conveyor
The visual gallery of the Avare Rolled Conveyor
Average rolled carriers are transport systems that provide product transfer without motor drive on free-write rolls. Products are advanced by the operator by dragging or taking advantage of their own weight in the appropriate curve. Flat-based coils, cash and similar cargo can be assessed in packaging, shipping and interstations transfer. Advanced Engineering determines the roll placement and six dimensions according to the product's base structure, weight and work area.
What are the roulette carrier wire good for?
The sub-section that touches the roll surface of the product is determining in the choice. A carton colli that flows with a Rijit and a flat-based box does not show the same behavior. The presence of a output, foot, emptiness or soft packaging on the bottom surface can lead to the assembly of the product between the rolls. Therefore, the smallest and the weakest product next to the weakest product should be examined at the beginning of the design.
Direct rolled transportation may not be suitable for a bag or small pieces without a proper base. These products can be transferred within a carrier box or a different carrier surface can be assessed. It is also important in which direction the product will move on the line; when the direction changes, the base length and the number of support required to sit on the rolls will change. The assessment made with the sample product makes these details visible.
Role range, diameter and available width
The distance between the rounds is selected in such a way that the shortest product is supported from sufficient point throughout the transportation. Small rounds in a wide range of the need can fall between the two rounds or be fixed from the edge. Increasing the number of rounds alone is not enough; the tube, mile and rolling layout must also meet the transferred load. The actual contact conditions are assessed without assuming that the load is equally distributed to all rounds.
With the transport width, the outer width of the shell is separate measurements. If there are side guides or high shell edges, the product can pass through the clear area is controlled. The roll diameter, the surface material and the choice of bedroom affect the first movement resistance. The free turn of the rolls, the equation and the drainage characteristics of the product base should be dealt together in order to not even be hard for the operator to be hand-driven.
Stop and control of transportation
The progress of the product on the sliding avar lines is related to the weight, the base material and the return resistance of the rounds. It is not correct to use the single curve value applicable to all products. A heavier box can even accelerate while a light box does not move. The delivery mode at the end of the line, the accumulation area and the stop elements are arranged taking into account these differences.
The collision of products at the output can affect the packaging and the product inside. The speed limit, separation or controlled stop solutions are assessed in the necessary applications. A stop must be not only in accordance with the weight of the product, but also with the impact of the load in motion. A safe work area is created taking into account the height of access and the possibility of cling at the point delivered to the operator.
The shades, feet and line settings
The longness of the carrier, the distance between the support legs and the condition of the ground affect the shase design. Adjustable legs can help to eliminate the coat differences in the installation; but it does not replace the inappropriate ground or insufficient support. The height difference and the transfer gap between the two surfaces in the lines combined with the current threshold are arranged in such a way that it cannot prevent the product passage.
If the line is portable, the balance under the wheels, fixation and load is assessed together. Turn or open transitional parts can be planned according to the operator and material traffic. The placement drawing should not only show the carrier, but also the coli reception area and maintenance access. So after the system is installed, problems such as the contagion of the work corridors can be prevented.
The price of the Avare rolled carrier and offer information
The main information determining the price is the net transport width, total length, work height, unit product weight and roll range. Roll material, the six-level surface, foot layout, side guides and stopers change the scope. For the offer, the product's base photo, the minimum and maximum measurements and the daily use of the product should be shared. If the flexible use is considered, the input and output coins should also be specified.
Frequently Asked Questions
Does the roulette carrier need electricity? The free-wheel transportation section does not use the engine. Even if the sensor, automatic stopper or other assistant equipment is added, their energy needs are also assessed.
Can it be converted to the engine system? This depends on the conformity of existing rolls and the shade to the driving elements. Only adding the engine may not be enough; mechanical order, including rolls and reserves, is reviewed.
What points are checked in the care? Hard-to-rotating rolls, relaxing connections, curved mills, surface damage and line equation are controlled. Increased rotation resistance can change the hand-transport strength and the flow of curved line.
The existing product information
| The product | The Role of the Conveyor |
| The basic function | Free-to-rotating rolls by hand push or transfer by controlled curve |
| Area of Application | Direct base and cash transportation |
| Information needed in the election | Product base size, roll name, unit load |
| Technical control point | The speed of movement depends on the product and curve. |
Ask about this product or application
Product images
