The vibrant carriers
The Vibration Conveyor Visual Gallery
Vibration carriers are transport systems that advance products with the vibration movement on a wheat or table. Part feed is assessed for the purpose of spreading in appropriate products and interstations transfer. Advanced Engineering deals with the boat geometry and movement order according to the flow behavior of the product. The holding of the product to the surface as much as the size, the rolling and the volume it forms in the entrance is also important in the choice.
Product behavior for vibrant carriers
The moist or sticking products do not show the same movement as dry and free flowing cracks. The shape of the piece, the surface condition and the way of progress in the contact area with the boat. Thin pieces can rise up in a row; long pieces can roll together. Therefore, it is not enough to know the name of the product alone. The real sample is an important entry to assess how the product behaves on the boat.
It should also be taken into account that the product is fragile or the surface is sensitive. The contact of parts with each other and the boat during progress may affect the product quality. The processing that is required is important to preserve the form of the product only if the transportation is the same. If the spread or progress in a particular direction is required, it should be clearly defined with which result it will be assessed. Every vibrant system does not provide the same separation or direction function.
The amount of food and the entry to the boat
The way the product is thrown into the boat directly affects the operation of the transportation order. Continuous and limited feeding is not the same as the sudden formation of a large set in the entrance. The output gap and the product pressure are assessed if the product comes from a warehouse. The layer thickness on the boat, the spread area and the desired output amount are handled together.
If a fixed amount is targeted for feed, this need should be specified separately without transferring it from one point to another. The change in quantity in production may affect the level of filling of the input tank and the liquidity of the product output. If there is a precise dose expectation, the measurement and control scope will also be defined. Only the application of vibration does not mean that the same amount will be transferred in all circumstances.
Geometry and transport surface
The width and length of the wire is selected along with the required capacity and product spread. Side walls should not make it difficult to clean and discharge while limiting the product to move out. The corner and transition areas are assessed so that they will not cause small pieces to get stuck or residues to accumulate. The surface material that is in contact with the product is determined according to the exhaust, temperature and cleaning conditions.
It is important at the output end in which width and in which position the product will be delivered to the next equipment. The broad band spread with the feeding to a narrow machine entrance does not require the same output order. The output height and fall distance are also controlled for sensitive products. The amount that the next equipment can accept should be matched with the target capacity of the vibrant part.
Tahrik, support and vibration isolation
The drive layout is selected along with the characteristics of the moving boat and the product on it. The subsequent adding of weight to the boat or the change of the connectivity points may affect the work behavior. The moving part, the shells or other support elements and a fixed shase system should be considered. The vibration setting is not only treated as the faster drive of the engine.
The transfer of vibration to the ground and neighboring machines is part of the installation work. Rijit connections, unsuitable tubes or the parts that touch around can create unwanted vibration routes. Support structure and insulation arrangement are treated according to actual installation conditions. The maintenance area around the machine and the vibration parts must be kept open to movement.
Compatibility with the production and control line
The start and stop order must be compatible with the power and output equipment in the entrance. The next machine will determine how the product will wait on the boat when it is filled. The level detection or power setting will be included in the control scope if necessary. The settings and control points to be applied in the product changes can be managed more regularly when the repeated production is identified.
In maintenance, the connectivity relief, the stretching on the boat surface, the state of the support elements and whether they are in contact with the surrounding area, the observation of noise or movement different from normal, the cleaning and the removal processes of the stuck product are performed after a safe stop, the extra piece of the boat or the change of the support arrangement, the work behavior should not be applied without assessment.
Information for the price of the vibrant carrier
For the offer, the product sample, the size and weight range, the desired supply amount, the input form and the output expectancy should be shared. The measurements of the bulk, the installation area, the working time and the cleaning conditions are also required. The carrier, the contact surface, the isolation and the control range determine the price. The installation and reception capacity of the connected machines will help the correct preparation of the solution.
Frequently Asked Questions
Can the product be moved with vibration? The product’s holding on the surface and accumulation behavior should be assessed by sample. The same movement arrangement is not appropriate in all products.
Does the carrier also make a sensitive dosage? Precision quantity control is a separate function. The necessary measurement and control arrangement must be defined within the project framework.
Can the current boat be extended? The motion and the carrier order should be re-evaluated because the moving mass and support conditions will change.
The existing product information
| The product | The vibrant carriers |
| The basic function | Moving the vibration of the pieces on the booth or table |
| Area of Application | The food and the good food. |
| Information needed in the election | Product behavior, food debris, geometry of the coat |
| Technical control point | The vibration isoleration and connections with the environment equipment should be assessed |
Ask about this product or application
Product images
