The mobile cable channel
With the 10×10, 18×25, 15×20, 25×25, 25×38, 35×50 and 35×100 options, check the lock connection in separate pages.
Things to Consider When Choosing Mobile Cable Channel
The area in which the internal width and the internal height of the cable passes in the moving cable channel; the external width and the external height define the area that must be divided inside the machine. The number of the cable and the external diameter of the cable are assessed together. The placement of the full cable inside the channel is not a correct choice method; the order in which the cable can work freely throughout the movement is checked.
The cable swing half-time and the carrier's turn half-time must be compatible with each other. The unit used for R in the source description has not been changed by comparing to the product size. The half-time, speed, drive and unsupported movement length must be verified for the full model. The openable bridge structure also differs according to the model; this detail is specified in applications that require maintenance access.
Technical image and model comparison
You can click on the product card to move to the separate page of the family you choose. The technical drawing is not used for the same purpose as the product appearance. It helps to understand the structure of the visual piece; the measurable appearance is based on connection and assembly. When multiple variants are displayed on the same technical page, match the Advanced stock code in the drawing title and in the technical table.
The empty cells in the table are not filled with predictions. the measurement unit is unknown or the record that is unconform in the catalogue is described on the product page. a non-published size is not calculated by the pixel ratio of the photo. the ordered piece must be checked that the definition written on the offer is the same as the model code. Even if the family name is similar, the link layout may change.
Measurement and offer information
In your request, specify the stock code, quantity and use place of the product. If you want to change the existing piece, share a picture of both the general appearance and the connectivity points. Breadth and infinite environment length for the band; cutting and size for the profile; number of cables and movement distance for the cable channel should also be ⁇ . Explain whether a single piece or a set with its connectivity is required.
After the technical comparison is completed, the delivery scope, material, color and necessary processing details are clarified on the offer. It is unpredictable that a link piece shown in the photo is included in the delivery. The delivery scope in the source is clearly written in models that this information is found on their own product page. Uncertain accessories are considered as separate pen before ordering.
Installation and control
The surface, the direction of movement and the access to maintenance before installation are checked. Only the renewal of the piece without the cause of the failure in the old product can cause the repetition of the same problem. Application details such as the swelling in the wire, the direction gap in the band or the excess availability in the cable channel should be shared in the technical assessment. The choice of product is based on the own installation instructions.
Frequently Asked Questions
What code should I use for the offer?
Use the IM code shown on the product page. This code is Advanced Engineering stock definition; it does not replace the manufacturer name or conformity certificate.
Can I use the size in the image directly?
Use the values in the measurable drawing of your own model only. Technical data for a lack of field From the contact page Ask for a picture.
Cable installation and maintenance access
The cables placed in the cable channel must be checked each other throughout the movement and how the carrier is contacting the inner surface. If the cables are moving together at different dimensions or different flexibilities, the settlement arrangement is assessed according to the application. Only collecting the total diameter may not explain the change of the place formed during the movement. Add the application details to the technical request in cases where the cable and cable are used in the same channel.
The connection of the moving end to the fixed end is determined along with the operating direction of the carrier and the available area on the machine. The connection lock should be specified with which channel size it will match when requested as a separate product. Input of the body measurements on a product page does not mean that the connection lock carries the same external measurements. The source description in the lock page is therefore also shown.
It is important in which direction the bridges can be opened during maintenance and how the cables can be accessed. The structure opened from the inside, from the outside or from both sides does not provide the same form of access as the unopened bridge type. The structure described in the source is kept separately for each model. After installation, it should be checked that there is no drilling, clinging and tension cable throughout the movement area; the own curvation limit of the cable is also based on.
How to specify a special connection?
Describe the desired change in the measurable picture. Report the connective surfaces of the opposite piece and the delivery length separately. The special processing request must be clearly written on the offer. It should not be assumed that a standard appearing detail is included in the delivery.