The Miles and the Miles
THK Wire Mil and Smoothers product family, size drawings and application-based selection information.
THK wire miles and slums are evaluated by different product families from the sensitive feed axes to the special movement arrangements. This page provides a clear selection framework for the DIN family and other main series. Local technical includes the original size drawings of the PDF, EBA, EBB, EBC, EPA, EPB and EPC families. Other families are introduced as a product group; it is unthinkable that the sizes of all of them are in the same document.
The family of DIN
EBA, EBB, EBC, EPA, EPB and EPC shells are studied with their own technical drawings. The diameter of the shell, the flange connection, the wire hole and the lubrication entrance are checked when preparing the assembly body. It is not enough to know the name of the manufacturer only to decide the right family. Share the full code of the piece in your hand and if you have the technical picture of the machine, prevents a wrong comparison.Other THK series
Between the SBK, SBN and HBN bally roof families; BIF, BLK, BNF, BNFN and BNK are among different sensitive wire options. Combined wire / yivli mile solutions such as BNS and NS may include different movements from a standard wire mile. These families are not considered an automatic alternative to each other for the same task. The product group must be properly determined according to the application.In a renewal request, specify whether the sum is required as a set alone or matched with a mile. In particular, the current bed layout of the axis and the side of the caplin in the special end processed mills should also be added to the drawing. The sensitivity class and the expectation of space are also written. If this information is missing, the full order code will not be created only with regard to the external shape.
The choice of a high-push-powered application with a small feed axis in the THK product group is different. The specific speed, load or maintenance feature in a family cannot be generalized to all THK mills. Source document and manufacturer verification is done on the chosen code basis. The technical images on the page can be expanded to read the measurements easily; the local PDF allows the same data to be studied in the original document format.
Product family and technical selection table
| The series | Group of Products | The documentation |
|---|---|---|
| EBA / EBB / EBC | The family | Local PDF in the field |
| EPA / EPB / EPC | The family | Local PDF in the field |
| The SBN / HBN | The family of the cave | Selecting a Model with a Special Document |
| BIF / BLK / BNF / BNFN / BNK | The sensitive family | The full code of the code |
| The NS / NS | Life and Yivli Mills | Special arrangement of movement |
Original technical drawings and measurement tables
Technical drawings and measurements · source PDF page 2
Technical drawings and measurements · source PDF page 4
Technical drawings and measurements · source PDF page 6
Üreticinin güncel ürün bilgisi ↗
What information should you share for the offer?
Set out the total length of the mill, the work strok and the end processing measurements by separating each other. The total length can also enter bed spots, the caplin connection and the safety shell teeth. Just reporting the distance of movement is not enough to determine the full length of the piece to be prepared. Transmitting the photo of the sample in your hand along with a measurable drawing reduces the possibility of misconduct, especially when adapted to the existing machine.In addition to the mass to be moved, share the direction of movement, desired speed, drive, working frequency and environmental conditions. The axis of lifting the river is not equally assessed with a horizontal table. The mile diameter does not determine the capacity of transport alone; the free size, the layer layout, the structure of the slope and the work circle are studied together. The exact load values must only be taken from the technical documentation of the full model selected.
Things to take care of in the installation and maintenance
The fixed side bed, the support side and the body of the shell should be installed on the same axis. Trying to remove the shell error by over-tension of the connective cravings does not provide proper movement. Millin end processes are prepared according to the sizes of the bed, the lock shell and the caplin. The seating of the shell on the body with the bed shell tolerance is separately controlled; the first operation is done at low speed.The type of lubricant and the range of renewal are determined according to the manufacturer's instructions, the working environment and the actual circle. The protection blindness and appropriate scatter solution are assessed in machines with slurry, dust or liquid. The bullying shell should not be removed over a mile without the appropriate transfer apparatus. The cause of damage to the old part during renewal should also be investigated; the problem of equalization or pollution should not be assumed solved only with the installation of the new shell.
Products and technical assessment
The full axis Miles of beds to guide the burden. Linear rail and cars You can check the section if you need a ready carrier body and drive unit Mills of Motion Modules The tasks of these products are different; while turning the vibration movement to the advance, the guidelines carry the geometry of the moving element. The correct solution is determined by assessing the whole axis.Frequently Asked Questions
Does THK DIN PDF cover all THK series?
Local PDF only covers the technical measurements of the six DIN families specified in the title. Other families also require a model certificate.
Is a bull-covered series replaced by every standard sum?
There is no such general compatibility: the body, the mile geometry, the gap, the precision and the connection arrangement should be checked on a full model basis.