Modular band carriers
Modular Bands of Conveyor Visual Gallery
Modular band carriers use the transport surface that is formed by plastic modules connected with pim. The band is driven by appropriate dentists and carries products to the next station on the production line. This structure allows the band surface to be selected according to the size of the product and process conditions. Advanced Engineering, in the modular carriers design, jointly assesses the band geometry, product support, shase installation and maintenance access.
Surface selection for modular band carriers
Open modules with closed surface modules meet different transport needs. The surface spaces for small pieces should be selected in such a way that will not cause the product to be stuck or lose balance. The open space ratio of liquid filtration or air passing is important in the desired applications. However, wide transparency does not mean better cleaning or better transport for each product; it is assessed along with the base form of the product.
The material of the band must be compatible with the working temperature, chemical contact and shock conditions. The options made from different materials of the same module geometry may show different behavior. In food contact use the name of the material is based on the suitability certificate and the limitations of the relevant product. In the application of hot product transport or cold environment, the size change of the band is also included in mechanical design.
The bond and the bond of the tooth
Hatve defines the step between the module connectors and is one of the basic choice information of the drawing system. The profile of the dentists must be compatible with the band series. It is not enough to choose the number of dentists or the mile structure knowing the band width alone. The weight of the product, the line length, the speed and the need for drawing drawing on the support surfaces are determined together.
The installation of the teeth in the roof mil helps the band to transfer the load in a balanced way. The mil, bed and shase connections are also treated according to the same load conditions. The support of the band in the bottom turn section, the necessary stretching area and other parts, the contact with the band is arranged according to the system conditions of the band manufacturer. The misconformation in the assembly should be checked that it can lead to irregular stretching in the teeth and modules.
Difference Between the straight line and the reverse line
Not every modular band is suitable for turning. The geometry permitted by a series that can be flushed alongside a straight-working series is different. In the turning lines, the internal semiconductor, bandwidth, guide structure and band stretching are evaluated together. A narrow corner may not be possible to pass by just changing the shade; the appropriate band series must be selected.
In the entrance and output passes, the transfer gap is compared to the base length of the product. The transfer layout is also designed to prevent loss of support in very small products. Side guides should direct the product but the band should not create unnecessary drainage or folding. If multiple product size is the same, even if the move is the same, the transition behavior for the smallest and the largest product is controlled together.
Cleaning and Module Change
The possibility of a damaged part to be replaced on a module basis can provide maintenance facility. However, this process requires access to the connection pimes and appropriate spare modules. Different series parts should not be used to replace each other even if they look similar from the outside. The spare part plan should clearly define the band series, line, material, width and connection pim type.
Cleaning should not be limited to the top surface. The product may accumulate in the module combinations, clay, drawing teeth and the bottom turn section. The access to these areas in the shade design facilitates the cleaning process. The concentration, temperature and application time of the used chemical should be compared to the allowed conditions of the band material. If washing is done, the electric equipment and bedroom arrangement are also selected according to the same working conditions.
How to determine the price of the modular band carrier?
The measurements and weight of the product to be transferred for the offer, the length of the line, the bandwidth, the transport speed and the working environment must be shared. The number of turn, curvature, side guidelines, carrier profiles and six material are other elements that affect the price. If the band of an existing carrier is renewed, the band series and the dental information are ⁇ necessary. The complete compatibility is not accepted with regard to the photo only; the measurement or sample is verified.
Frequently Asked Questions
Can the modular band carrier be used in the washing area? When the appropriate band, shase and electric equipment are selected, such applications can be assessed. The form of washing and chemical conditions should be determined at the beginning of the design.
Should the damaged band be completely replaced? Depending on the condition of the damage and the band series, only the relevant modules can be changed. The dental compatibility and the stretching in the neighboring modules should also be studied.
Can the current straight band be turned or even turned? For this, the band must be a set suitable for the turn. The necessary semi-dimensional and support arrangement is not created without the turn with the straight-working band.
The existing product information
| The product | Modular band carriers |
| The basic function | Transmission of plastic modules and tooth drive |
| Area of Application | washed production areas and the right band-to-backed lines |
| Information needed in the election | Band line, open space ratio, transport load |
| Technical control point | The return geometry and band material must be selected together. |
Ask about this product or application
Product images
