Machinery • Motion • Production 0212 549 70 25info@ilerimuhendislik.com
🌐 EN
TürkçeEnglishРусскийAzərbaycancaالعربية
K08

O-Ring Role Carrier

O-Ring Wire Rolling Carrier — O-Ring Wire Rolling Carrier Product and Application View 1

O-Ring Wire Rolling Conveyor Visual Gallery

O-ring wheeled wheeled carriers carry appropriate-based light products and packages by moving between wheels with round-cutting wheels. The installation of wheels canals, wheels cut and wheels-interwheels distance system are the basic choice information. Advanced Engineering assesses these measurements along with product weight, line speed and work circle. Thus, it is aimed at creating a transfer arrangement that is suitable for working with the real product, not only the wheels turn.

Where are the O-ring roulette carriers used?

This drawing order can be assessed in the packaging, control or interstations transfer of small coli and boxes. The base of the product must stand firmly on the rolls. Soft bag, irregular under surface or very short products may create problems when moving directly on the roll. In such cases, the use of the carrier container or a different transport surface is addressed. The product sample reveals the contact characteristics that only the external dimensions do not show.

The light product definition is not a capacity value alone. The material of the tape affects the movement that can be transferred, length, cutting and working conditions. The total number of products in a area and the strength required during the first departure should also be taken into account. The applications where the product stands for a long time, often departure or accumulates at the end of the line should also be explained in the offer phase.

Rulo channels and center distance

The locations are as important as the number of channels in which the thread is sitting. In neighboring rounds, the channels may work or get out of the channel when the channels are not in the same direction. The distance between the channel center and the roll end should be indicated when the replacement roll is measured. The tube length, the total length of miles and the inner openness of the six are measured separated; the transfer of these measures as a single size may cause the assembly disconformity.

The axis distance between the rounds directly affects the trail length. Changing the roulette range of the existing line or adding a interrail does not mean that the same trail can be used. The shape of the channel and the cut of the trail should also be matched. The assembly length and tension are determined according to the characteristics of the trail used. The color or external appearance is not enough to define the mechanical characteristics of the trail alone.

Tension and movement

In insufficient tension, switches may be seen; excess tension may bring additional burden to the rounds' beds. Therefore, trying to solve the transfer problem is not a correct approach by putting a shorter tape alone. The rounds' turn resistance, channel equation, load and the surface condition of the tape are controlled together. The appropriate assembly conditions of the tape are applied compared to the manufacturer's information.

Oil, powder, moisture and cleaning materials may affect the holding or life of the tape. The environment and the remains that are transported from the surface of the product where the carrier is located should be indicated in the choice. The conditions of a line carrying a dry carton box with a wet work line are different. The same temperature or chemical resistance for all O-ring tape is not accepted without assessing the suitability of the material.

The product and product control

The number of rolls that are driven, the power source and the way the trails distribute the movement. The line extension does not mean that the current drive will remain automatically sufficient. When the new section is added, the total load, the need for departure and the transfer losses are re-evaluated. If the distance between the products is needed, sensors and independent control areas are included in the work scenario.

When the machine stops at the end of the line, what the product will do should be specified in advance. The standing of the product at a fixed point while the rolls continue to turn can create a drilling on the bottom surface. The behavior and control arrangement of the packaging in the storage application is therefore important. Automatic waiting or order-food is not considered a feature provided by the only tape connection.

The points to be checked

The tracks are monitored if there are fractures, permanent extension, surface disturbances and output out of the channel. The roulette channels and surrounding areas must be kept clean. The spare trail is checked before the roulette is installed and the shase connections are not swallowed. Access to the moving trail and roulette areas should be limited to appropriate protectors; maintenance process must be done after a safe stop.

What information do I need for the O-ring carrier price?

Line length, net transport width, work height and roll range are the main measurements of the offer. These are added to the product's minimum and maximum sizes, weight, desired speed and daily working time. Channel layout, drive range, sensors and side guides affect the price. In the renewal of the existing line, the roll and thread sizes, as well as the photos of the connection areas should be shared.

Frequently Asked Questions

Can Poly-V be used instead of the O-ring belt? The cut and surface of the two slopes are different. The passing requires the appropriate roll or shell arrangement and the drawing account; the direct change is not accepted.

If the thread is sliding, more throwing is the solution? First, the load, surface pollution, rolling resistance and the linear conformity should be checked. Over-tension may cause other failures.

Can the same or even different boxes be moved? The shortest product roll support and the transition conditions of all products must be provided. Detection behavior in sensory systems is also controlled according to the product variety.

The existing product information

The product O-Ring Role Carrier
The basic function Movement between rounds with round-cutting stripes
Area of Application Light products and packaging
Information needed in the election Rule range, channel locations, product load
Technical control point The load and speed limits are determined by the trail material and location.

Conveyors

Ask about this product or application

Product images

O-Ring Wire Rolling Carrier — represented product visual
LET’S PLAN TOGETHER

The next step for your production line.

Share your dimensions, technical drawing or requirements.

Let's Discuss Your Project ↗