PVC and PU Conveyor Bands
Examine the PVC surface options and the band in food transport applications with images and published technical data.
The points to be noticed when choosing PVC and PU Conveyor Bands
The band selection begins with the surface of the product, the load, the environmental conditions and the desired direction of movement. The increase in thickness does not mean the more suitable choice alone. The diameter of the band, the form of connection and the band route are also controlled. The existing band measurement should be clearly indicated that the open size and the infinite environmental length are different.
PVC and PU materials are not only distinguished from the photo color. In particular in food transport applications, the full material definition and contact conformity certificate of the product must be verified on the model basis. The general promotion for a product family does not show that the same certificate for each variant in the list is present. The material area has not been added PVC or PU label, as a presumption, to the lines not clearly specified.
Technical image and model comparison
You can click on the product card to move to the separate page of the family you choose. The technical drawing is not used for the same purpose as the product appearance. It helps to understand the structure of the visual piece; the measurable appearance is based on connection and assembly. When multiple variants are displayed on the same technical page, match the Advanced stock code in the drawing title and in the technical table.
The empty cells in the table are not filled with predictions. the measurement unit is unknown or the record that is unconform in the catalogue is described on the product page. a non-published size is not calculated by the pixel ratio of the photo. the ordered piece must be checked that the definition written on the offer is the same as the model code. Even if the family name is similar, the link layout may change.
Measurement and offer information
In your request, specify the stock code, quantity and use place of the product. If you want to change the existing piece, share a picture of both the general appearance and the connectivity points. Breadth and infinite environment length for the band; cutting and size for the profile; number of cables and movement distance for the cable channel should also be ⁇ . Explain whether a single piece or a set with its connectivity is required.
After the technical comparison is completed, the delivery scope, material, color and necessary processing details are clarified on the offer. It is unpredictable that a link piece shown in the photo is included in the delivery. The delivery scope in the source is clearly written in models that this information is found on their own product page. Uncertain accessories are considered as separate pen before ordering.
Installation and control
The surface, the direction of movement and the access to maintenance before installation are checked. Only the renewal of the piece without the cause of the failure in the old product can cause the repetition of the same problem. Application details such as the swelling in the wire, the direction gap in the band or the excess availability in the cable channel should be shared in the technical assessment. The choice of product is based on the own installation instructions.
Frequently Asked Questions
What code should I use for the offer?
Use the IM code shown on the product page. This code is Advanced Engineering stock definition; it does not replace the manufacturer name or conformity certificate.
Can I use the size in the image directly?
Use the values in the measurable drawing of your own model only. Technical data for a lack of field From the contact page Ask for a picture.
Band area and order size
In the renewal of an existing band, the setup share of the band on the machine should also be assessed. The outward-measured surroundings of the dissolved band and the order surroundings of the new band are not accepted the same without the knowledge of the form of the additional place and the location of the drawing. Explaining the desired width and neck by which method is measured, the offer is prepared through the correct measurement. A simple straight-course band definition on the lines with a turn or special direction may not be sufficient.
If the side wall, carrier and guide profile is added, their height and position on the band are also indicated. The direction to be moved by the product, the turn and discharge point around the tambour affects the placement of these parts. The upper surface fabric is also selected along with the material that is moved; the modeled surface does not give the same holding behavior for each product. The moisture, oil and cleaning conditions should be included in the technical assessment.
Other mechanical characteristics of the models with the thickness and temperature information in the source list cannot be automatically removed. The minimum drum diameter, the connection method and the stretching information are separate technical fields. If these values are not published, the complete model is required to be confirmed. When the color definition the tone of the visual is different, the order color must be clarified by the model definition and if necessary by the sample.
How to specify a special connection?
Describe the desired change in the measurable picture. Report the connective surfaces of the opposite piece and the delivery length separately. The special processing request must be clearly written on the offer. It should not be assumed that a standard appearing detail is included in the delivery.