Chain Role Carrier
The Channels of the Role Carrier
Chain-driven rolled carriers allow the progress of the cargo by distributing the motor movement to the rolls through the chain and the wheels. The chain transfer is designed together with the selection of the rolls in these systems used in the transfer of the box, palette and appropriate industrial load. Advanced Engineering assesses the mechanical order of the carriers according to the application, taking into account the distribution of the cargo on the line, the output conditions and the maintenance access.
Choice of cargo for chain-driven rolled carriers
The total weight of the load to be carried is important but not enough alone. The palette's basin fingers, the feet of the box or the carrier surface of the product determine which rounds will be involved in the load. The intersection of the load on the line or the pressing of only a few rounds at the entrance can create different difficulties. Therefore, the loading and discharge moments as normal as the transport condition should also be considered.
The roll range should ensure that the product receives sufficient support throughout the movement. The base contacts may also change when the direction of the palette changes. Damaged palettes, lightweight wooden parts and output on the base may cause the assembly in the transfer points. The type of load and the base conditions to be accepted in the system design are clearly indicated and uncertainty during use is reduced.
Chain, Dental and Roll Geometry
The line of the chain, the profile of the tooth and the order arrangement are selected in line with each other. The number of teeth on the tooth, the rulo diameter and the drive position affect the movement transfer of the carrier. The tooth positions on the rounds should also be matched to work in the same direction. The only given of the tube diameter and height in the replacement roulette order does not guarantee the conformity to the existing chain line.
The body width, the mile ends and the six connections are other parts of the transmission order. The structure driven from a common chain line with the interroll chain connection may require different settings. The possibility of accessing the piece in maintenance, controlling the chain tension and deleting the conservation is considered when the order to be used is determined. The renewal of the existing line facilitates the measuring drawing or sample roll assessment.
Motor and work circuit
The engine selection is not only based on the rotation of the empty line. The total load to be moved at the same time, the first departure conditions, speed, transfer losses and stop-up frequency are taken into account. The line that works in a single direction with a frequent direction change may not have the same mechanical and control needs. Therefore, it is important to identify the work rotation before order.
If the carrier needs to deliver the product to another machine, the input and output signals are determined. The stop of the load at the end of the line may require the backward load to wait in a controlled manner. If the accumulation is considered on the continuous rotation rounds, the product base, the contact force and the suitability of the drawing order are also assessed. The use of chain drawing alone does not provide the controlled drawing function.
Şase ve transfer noktaları
The carrier shase, foot range and ground connections are assessed according to the load's position. The leave of the load with a blow or the unbalanced placement with the forklift in the entrance may create different effects than the normal transport account. These conditions should be shared at the beginning of the design. The total outer width, including the net transport width and chain conservations, is separately shown in the settlement drawing.
The passage gap between the two carriers must be in accordance with the base structure of the palette or box. The position and position sensitivity are assessed on the lines connected to the turn, lift or direction change mechanism. The mechanical stop and sensor position are determined according to this transfer scenario. The maintenance corridors and the areas to which the operator will access are also part of the line order.
Maintenance and maintenance of the chain
The chain transfer areas must be protected by appropriate storage that restricts access during work. The storage is accessible for maintenance, facilitates the regular controls. Chain extension, dental stretching, relaxing connections and balancing problems should be monitored. The raining requirement is determined according to the type of the chain and the working environment; it is applied in such a way that it does not create unwanted contact with the product or packaging.
The price of the chain-driven carrier
For the offer, the size of the load, the base structure, the unit weight and the maximum total load on the line should be shared. The length, the clear width, the work height, the speed and the daily working time are also required. The chain and roll layout, the control communication with the six-material, the reserves, the sensors and the connected machines changes the price range. The measurements that show the position of the dentist are ⁇ important if a change is made in a existing system.
Frequently Asked Questions
Can each palette chain be moved by a drawing roll? The base geometry of the palette, the strength and the direction of progress must be appropriate. Support conditions for the smallest and weakest palette are controlled separately.
Can the chain line work in a double direction? It can be assessed by appropriate mechanical and control design. The frequency of direction change, load and connection conditions should be specified in the choice.
What measurements do I need to change the roll? In addition to the tube diameter and height, the mill ends, the type of tooth, the number of rows and the position of the tooth should be measured according to the shade.
The existing product information
| The product | Chain Role Carrier |
| The basic function | Power transfer between the chain and the teeth and the rolls |
| Area of Application | The palet, cash and industrial cargo transfer |
| Information needed in the election | Chain type, roll diameter, load distribution |
| Technical control point | The chain transfer areas must be protected with appropriate conservation. |
Ask about this product or application
Product images
