The compressed
Compressor Cutter, cover, fittels and panel holders are an option that is evaluated along with the project’s measurement and installation needs in the group. Advanced Engineering deals with your choice along with the technical options of the product and the conditions of the structure to be used.
The Dropbox – Technical Information
| Catalog Code | The IM-SA-SC |
Variation and Variation Options
| Catalog Code | The size / choice | Technical values |
| The IM-SA-SC-01 | The Stretch of the 10/4-10/3 | The product / ölçü tanımına bakınız |
| IM-SA-SC-02 | Sıkıştırma Çıtası 8/4 – 8/3 | The product / ölçü tanımına bakınız |
Channel, panel and surface completion
Cover, fits, fits and panel holders are assessed to complete the open surfaces of the profile structure or keep the panel in a specific position. The task of each piece is not the same. The profile end cover is placed at the end of the cutting while the channel closing product works throughout the channel. The element that touches the glass or panel is the panel thickness and seat format selection data.
Compatibility with the material and the cut
The profile’s external size, channel structure and the thickness of the panel to be used are checked together. The correct support of the panel with the filing into the channel is separate conditions. The color, surface and material selection is assessed according to the use environment. The cleaning materials, if there is temperature or external environment effect, must be shared before the order. Visually similar parts will not be accepted to meet the same assembly gap.
Cutting and assembly details
The length and additional places required for the boil or fits used in size should be indicated. The shape of the combination in the corners is considered, the panels are installed and removed and the maintenance access. The joint use of the channel with other devices may limit the installation of some closing parts. The number and position of the panel holders are assessed along with the panel size; the entire panel connection is not planned according to a single product photo only.
The limits of the completion parts
Cover and fittels arranges the surface of the product; the carrier connection does not replace. If the panel needs to be carried, kept under vibration or used in the protective cabin, the whole of the system will also be assessed. After the assembly, there is a vacuum, relaxation or exit checked. The shrinking or deforming parts must be addressed in the maintenance plan.
When preparing a list of measurements
The indication of which surface or edge measurements are taken prevents the mix of similar parts. Cutting length, external measurement, channel openness and connection distance are different information. The unit used in the drawing must be the same in all lines. If the new one is to be taken instead of the existing piece, not only the total length, but also the details on the link side. Sharing product groups and parts in a regular list makes the range of the offer more clear.
Identify the variant correctly.
If there are more than one measurement or connection options within the product family, specify the line to be ordered. Similar names may be prepared for different channels, metric teeth or connection surface. The options in the technical table are not considered as parts that can be used in place each other. The photo and size of the profile section in the product to be added to a existing structure can also be added to the offer request.
Projects and Proposals
The list you will share with Advanced Engineering should include the product name, catalog code, size and piece. Listing the connectors of the same structure together reduces the likelihood of missing material. If you need a specific size, surface, processing or different settings, write it also. Photos help to understand the assembly; the measurable drawing allows the accurate assessment of the connectors. The supply scope is clarified in the supply phase.
Check before installation
The name and size of the delivered product must be compared to the prepared material list. Connector surfaces and the position of the piece in the project are checked. It should not be assumed that other products in the assembly samples are included in this pen. Profile, cottage, cottage or panel may also be required. The load and movement conditions in the application are not determined about the conformity of the whole structure without the knowledge of the load and movement conditions in the application.
Frequently Asked Questions
What information do you need when choosing this product?
The profile or assembly surface to be used in addition to the product name and size should be shared, the necessary pieces and working conditions. The variant table of products clearly indicates which option is required. If adaptation to a existing system is made, the measurable drawing or sample assessment will be made easier.
Are all the pieces included in the order?
In the assembly images, the profile, the link element or the assistant parts can be displayed together. The delivery range of this pen is described during the offer. It is recommended that you specify the shell, the cottage, the panel and other parts you need separately in your list.
How to check the conformity with the existing piece?
In addition to the outer appearance, the measurements of the channel, hole, tooth and assembly surface are compared. Combination of the product code alone may not be sufficient. The measurement, photo and if necessary the relevant variants are assessed through the sample.
Important products and offers
Sigma profile and linking elements catalogue You can check out other groups. Cover, Fits and Panel Guards You can compare the options in the same group from the section. with your size and list of items Ask for advanced engineering .
Examples of Application Gallery
Uygulama örnekleri
Sıkıştırma Çıtası için bu ürüne özel hazırlanmış montaj ve kullanım örneklerini inceleyebilirsiniz.
Uygulama örnekleri seçim ve yerleşim fikri sunar. Kesit, bağlantı düzeni ve yük koşulları projeye göre değerlendirilir.