The thick Somun
The sliding sum is selected to create the appropriate link point in the profile channel. Channel series, metric size and the form of attachment of the piece should be evaluated together. Advanced Engineering will deal with your choice along with the technical options of the product and the conditions of the structure to be used.
The Cold Cold - Technical Information
| Catalog Code | The IM-SA-TS |
| The tooth | M8 × 1,25 |
| The channel | K10 |
| The Reliance Class | CL6 |
| covered | The Cr+3 Silver |
| The length of the side wing (B) | 18,94 mm |
| The wing width (F) | 9,90 mm |
| The Channel Body Breadth (E) | 9,81 mm |
| The product height (K) | 8,48 mm |
| The area of the pool (S) | 8,07 mm |
| The upper level (N) | 2,19 mm |
| The Radius (D) | 4,69 mm |
| Reporting History | 25.09.2026 |
| Lot | L2607127 |
| Charge | 389381 |
| The average measurement — the average measurement | 9,75 µm |
| Hardness – measurement average | 171,60 Hv |
| The dental control | 6H geçer / geçmez mastar |
| Measurement environment | 20 °C ± 2 °C |
Variation and Variation Options
| Catalog Code | The size / choice | Technical values |
| IM-SA-TS-01 | The M4 6K | A: 11 · B: M4 |
| IM-SA-TS-02 | The M5 6K | A: 11 · B: M5 |
| IM-SA-TS-03 | The M4 8K | A: 16 · B: M4 |
| IM-SA-TS-04 | The M5 8K | A: 16 · B: M5 |
| IM-SA-TS-05 | The M6 8K | A: 16 · B: M6 |
| IM-SA-TS-06 | The M4 10K | A: 19 · B: M4 |
| IM-SA-TS-07 | The M5 10K | A: 19 · B: M5 |
| IM-SA-TS-08 | The M6 10K | A: 19 · B: M6 |
| IM-SA-TS-09 | The M8 10K | A: 19 · B: M8 |
Connection in the channel
The channel shell creates a connection point in the profile channel and allows the device to fix with the slurry of the shell. The shell that sits on the channel, the channel series and the metric female are selected together. Only knowing the tooth size is not enough. The parts with the same metric tooth can be designed for different channel geometries; the nominal channel information should be checked along with the installation.
The form of the channel and the channel
Some shells are placed from the profile end while some types can be placed from a suitable point of the channel. The wire or scratched structure can help keep the position during the installation; but the right channel does not keep the place of the match. The shell is ⁇ important if the device is added to a closed shell later. The shell format must be verified that the channel is accessible where the connection is made.
The length and the tooth.
The length of the cranberry is determined along with the thickness of the attached piece and the necessary tooth holding. The very short cranberry may not provide sufficient connection; if the unsuitable length may contact the bottom of the channel or another piece. The size of the tooth and the connection surface should be matched with the product option. The information of the relevant components for the stretching values is based; it is not accepted that the same force will be applied to all the cranberry.
Order and installation control
The offer must indicate the channel series, the metric tooth, the type of somon and the unit separately. If several channel families are used in the same project, the list can be divided into product groups so that the materials are not mixed. After the assembly, the apparatus is checked that the channel is properly sitting and the cranberry is properly connected. The load that the added piece brings to the connection point should be assessed along with the profile selection.
When preparing a list of measurements
The indication of which surface or edge measurements are taken prevents the mix of similar parts. Cutting length, external measurement, channel openness and connection distance are different information. The unit used in the drawing must be the same in all lines. If the new one is to be taken instead of the existing piece, not only the total length, but also the details on the link side. Sharing product groups and parts in a regular list makes the range of the offer more clear.
Identify the variant correctly.
If there are more than one measurement or connection options within the product family, specify the line to be ordered. Similar names may be prepared for different channels, metric teeth or connection surface. The options in the technical table are not considered as parts that can be used in place each other. The photo and size of the profile section in the product to be added to a existing structure can also be added to the offer request.
Projects and Proposals
The list you will share with Advanced Engineering should include the product name, catalog code, size and piece. Listing the connectors of the same structure together reduces the likelihood of missing material. If you need a specific size, surface, processing or different settings, write it also. Photos help to understand the assembly; the measurable drawing allows the accurate assessment of the connectors. The supply scope is clarified in the supply phase.
Check before installation
The name and size of the delivered product must be compared to the prepared material list. Connector surfaces and the position of the piece in the project are checked. It should not be assumed that other products in the assembly samples are included in this pen. Profile, cottage, cottage or panel may also be required. The load and movement conditions in the application are not determined about the conformity of the whole structure without the knowledge of the load and movement conditions in the application.
Frequently Asked Questions
What information do you need when choosing this product?
The profile or assembly surface to be used in addition to the product name and size should be shared, the necessary pieces and working conditions. The variant table of products clearly indicates which option is required. If adaptation to a existing system is made, the measurable drawing or sample assessment will be made easier.
Are all the pieces included in the order?
In the assembly images, the profile, the link element or the assistant parts can be displayed together. The delivery range of this pen is described during the offer. It is recommended that you specify the shell, the cottage, the panel and other parts you need separately in your list.
How to check the conformity with the existing piece?
In addition to the outer appearance, the measurements of the channel, hole, tooth and assembly surface are compared. Combination of the product code alone may not be sufficient. The measurement, photo and if necessary the relevant variants are assessed through the sample.
Important products and offers
Sigma profile and linking elements catalogue You can check out other groups. Channel and Cave You can compare the options in the same group from the section. with your size and list of items Ask for advanced engineering .
Examples of Application Gallery
Uygulama örnekleri
Tırtıklı Somun için bu ürüne özel hazırlanmış montaj ve kullanım örneklerini inceleyebilirsiniz.
Uygulama örnekleri seçim ve yerleşim fikri sunar. Kesit, bağlantı düzeni ve yük koşulları projeye göre değerlendirilir.