Advanced engineering

30×90 Sigma Profil K8

Advanced Engineering

30×90 Sigma Profil K8, modüler makine şaseleri, çalışma tezgâhları ve profil konstrüksiyonlarında kullanılan bir kesit seçeneğidir. Dış ölçüsü 30×90, kanal serisi K8 olan bu ürün bağlantı parçalarıyla birlikte değerlendirilir. İleri Mühendislik, seçiminizi ürünün teknik seçenekleri ve kullanılacağı yapının koşullarıyla birlikte ele alır.

30×90 Sigma Profil K8 — teknik bilgiler

Catalog Code	The IM-SP-3090-S-K8
The profile cut	30 × 90 mm
Channel series	K8
Materials / alaşım	6063 Aluminium
Maximum length	6020 mm
Unit Weight	2,145 kg/m
Profile size	30 × 90 mm
Profile length	6020 mm
Cut area	791,47 mm²
Atalate moment x	7,772 cm⁴
Athletic moment	61,018 cm⁴
The moment of WX	5,181 cm³
The moment of strength	13,559 cm³

Bu kayda ait kesit bilgileri: Profil kesiti: 30 × 90 mm; Kanal serisi: K8; Malzeme / alaşım: 6063 alüminyum; Maksimum uzunluk: 6020 mm; Birim ağırlık: 2,145 kg/m; Profil ölçüsü: 30 × 90 mm; Profil uzunluğu: 6020 mm; Kesit alanı: 791,47 mm²; Atalet momenti Ix: 7,772 cm⁴; Atalet momenti Iy: 61,018 cm⁴; Mukavemet momenti Wx: 5,181 cm³; Mukavemet momenti Wy: 13,559 cm³. Katalogdaki teorik değerler üretim toleransları ve gerçek uygulama koşullarıyla birlikte değerlendirilir. Belirtilmemiş bir ölçü veya kapasite bu ürün için varsayılmamalıdır.

Choice and channel

The external dimension of the profile is the initial knowledge of the area the structure will cover. Options with different channels series or meat thickness can be found in the same external cut size. Therefore, accessories are not ordered only over the size and size. The channel's clarity, the internal geometry and the way of work of the part to be connected are compared together. The match of the cutting of the cutting, the cutting and the corner connection ensures the proper assembly.

Differences between Heavy, Light and Closed Structure

The profile name indicates a different character of the defining cut, Light, Super Light, closed or radio. The criteria for the selection of a long-spoon carrier curve with a light panel frame are not the same. The number of channels that can be used for connection can also be checked while the closed surfaces can be assessed in terms of appearance or cleaning. The radio outer surface is based on the corresponding cut geometry in the applications required.

Cutting list and material plan

When preparing the offer, specify each piece length as millimeters, by writing a piece in front of it. If the same project has different sizes, it makes the assembly plan more clear to share them in separate lines instead of a single total meter. The catalogue has a clearly cut length of the piece length of the piece is different information. The piece length, the finish processes and the piece arrangement to be delivered must be explained in the offer stage.

Transparency, direction and connection arrangement

Cutting values can be used in evaluating how the profile behaves under load; but it does not show the capacity of the whole shas alone. The support distance, the load position, the profile's cutting direction and connection flexibility are handled together. The work scenario in applications with impact, moving load and vibration is also defined. Instead of catalog values, the writing of a predictive transport capacity does not provide the right choice.

When preparing a list of measurements

The indication of which surface or edge measurements are taken prevents the mix of similar parts. Cutting length, external measurement, channel openness and connection distance are different information. The unit used in the drawing must be the same in all lines. If the new one is to be taken instead of the existing piece, not only the total length, but also the details on the link side. Sharing product groups and parts in a regular list makes the range of the offer more clear.

Identify the variant correctly.

If there are more than one measurement or connection options within the product family, specify the line to be ordered. Similar names may be prepared for different channels, metric teeth or connection surface. The options in the technical table are not considered as parts that can be used in place each other. The photo and size of the profile section in the product to be added to a existing structure can also be added to the offer request.

Projects and Proposals

The list you will share with Advanced Engineering should include the product name, catalog code, size and piece. Listing the connectors of the same structure together reduces the likelihood of missing material. If you need a specific size, surface, processing or different settings, write it also. Photos help to understand the assembly; the measurable drawing allows the accurate assessment of the connectors. The supply scope is clarified in the supply phase.

Check before installation

The name and size of the delivered product must be compared to the prepared material list. Connector surfaces and the position of the piece in the project are checked. It should not be assumed that other products in the assembly samples are included in this pen. Profile, cottage, cottage or panel may also be required. The load and movement conditions in the application are not determined about the conformity of the whole structure without the knowledge of the load and movement conditions in the application.

Frequently Asked Questions

What information do you need when choosing this product?

The profile or assembly surface to be used in addition to the product name and size should be shared, the necessary pieces and working conditions. The variant table of products clearly indicates which option is required. If adaptation to a existing system is made, the measurable drawing or sample assessment will be made easier.

Are all the pieces included in the order?

In the assembly images, the profile, the link element or the assistant parts can be displayed together. The delivery range of this pen is described during the offer. It is recommended that you specify the shell, the cottage, the panel and other parts you need separately in your list.

How to check the conformity with the existing piece?

In addition to the outer appearance, the measurements of the channel, hole, tooth and assembly surface are compared. Combination of the product code alone may not be sufficient. The measurement, photo and if necessary the relevant variants are assessed through the sample.

Important products and offers

Sigma profile and linking elements catalogue You can check out other groups. The Sigma Profiles You can compare the options in the same group from the section. with your size and list of items Ask for advanced engineering .

For technical information about the material EN AW-6063 Aluminium alloy technical information This general material information is assessed separately from the corresponding profile’s cutting values and project account.

Examples of Application Gallery

Uygulama örnekleri

30x90 Sigma Profil K8 için bu ürüne özel hazırlanmış montaj ve kullanım örneklerini inceleyebilirsiniz.