FF Series Miles End Bed
FF Series Wipes Mill End Beds product look, technical data and model options.
← Vidali Mills Beds Return to Products Families
Product images
Teknik çizim ve ölçü işaretleri
Teknik tablo ve model seçenekleri
| İleri stok kodu | Stok Adı | Marka | Model | Ød | R | G | T | H | F | D | P | d1 | d2 | Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IM-MP-1760-1001 | Vidalı Mil Ucu Yatağı | DMS | FF 10 | 8 | 43 | 35 | 12 | 7 | 5 | 28 | 35 | 3,4 | 6 | 4 |
| IM-MP-1760-1002 | Vidalı Mil Ucu Yatağı | DMS | FF 12 | 10 | 52 | 44 | 15 | 7 | 8 | 34 | 42 | 4,2 | 8 | 4,4 |
| IM-MP-1760-1003 | Vidalı Mil Ucu Yatağı | DMS | FF 15 | 15 | 63 | 52 | 17 | 9 | 8 | 40 | 50 | 5,2 | 9,5 | 5,4 |
| IM-MP-1760-1004 | Vidalı Mil Ucu Yatağı | DMS | FF 20 | 20 | 85 | 68 | 20 | 11 | 9 | 57 | 70 | 6,3 | 11 | 6,5 |
| IM-MP-1760-1005 | Vidalı Mil Ucu Yatağı | DMS | FF 25 | 25 | 98 | 79 | 24 | 14 | 10 | 63 | 80 | 8,7 | 14 | 8,6 |
| IM-MP-1760-1006 | Vidalı Mil Ucu Yatağı | DMS | FF 30 | 30 | 117 | 93 | 27 | 18 | 9 | 75 | 95 | 10,7 | 17,5 | 10,8 |
| IM-MP-1760-1007 | Vidalı Mil Ucu Yatağı | DUP | FF 10 | 8 | 43 | 35 | 12 | 7 | 5 | 28 | 35 | 3,4 | 6 | 3,4 |
| IM-MP-1760-1008 | Vidalı Mil Ucu Yatağı | DUP | FF 12 | 10 | 52 | 44 | 15 | 7 | 8 | 34 | 42 | 4,2 | 8 | 4,4 |
| IM-MP-1760-1009 | Vidalı Mil Ucu Yatağı | DUP | FF 20 | 20 | 85 | 68 | 20 | 11 | 9 | 57 | 70 | 6,3 | 11 | 6,5 |
| IM-MP-1760-1010 | Vidalı Mil Ucu Yatağı | DUP | FF 25 | 25 | 98 | 79 | 24 | 14 | 10 | 63 | 80 | 8,7 | 14 | 8,6 |
| IM-MP-1760-1011 | Vidalı Mil Ucu Yatağı | DUP | FF 30 | 30 | 117 | 93 | 27 | 18 | 9 | 75 | 95 | 10,7 | 17,5 | 10,8 |
FF Series Wide Mill End Bed Choice
This page includes only the family of FF Series Wire Mill End Beds. Product photos, published technical information and existing model lines are reviewed under the same title. Do not use the similar appearance of another product family for this product. The full model name and link details should be checked together.
There are 11 source models for this family. Ød, R, G, T, H, F, D, P, d1, d2, Z fields on the table are displayed in the way they are published in the source. Each line belongs to its own model; the measurement of different lines should not be combined and the order definition should not be made.
Information needed for the installation and offer
Share the full model code of the existing piece, the photos of the desired unit and the connective surfaces. If a piece is selected new instead, also report the size of the opposite piece. specify that the product is required as a single component, set or processed piece. If you have a specific hole, channel or processing details not shown in the technical drawing, add a measurable picture.
If a value in the technical table is left empty, the measurement for this field should not be assured. Scale calculation is not made through the displayed product photo. Brand and model differences are checked before order; the page does not report the instant stock or the exact delivery time.
The inner diameter of the bed is controlled together with the processed diameter of the mile end in the sliding mile end bed. The function of the fixed and supporting sides is different; only no change is made according to the outer appearance. The assembly holes, the central height and the detection elements above the mile are matched with their own drawing.
Frequently Asked Questions
What model should I look at?
If you have literal sizes, compare it with the technical drawing of the same product; do not make a review over another series drawing.
What should I send for the offer?
Model code, a piece, the photo of the existing piece and if there is a measurable technical picture is a sufficient beginning. From the contact page You can share your application information.