SCE VUU Series Linear Rulman
SCE VUU Series Bilial Linear Rulman product view, technical data and model options.
Linear Rolls and Bed Cars Return to Product Families
Product images
Teknik çizim ve ölçü işaretleri
Teknik tablo ve model seçenekleri
| İleri stok kodu | Stok Adı | Model | h | D | W | H | G | A | J | E | S1X1 | S2 | L | Dinamik Yük C N | Statik Yük C₀ N | Ağırlık (gr) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IM-MP-1742-1001 | Kafesli Rulman Kapalı - Kısa Tip | SCE 16 VUU | 19 | 25 | 50 | 38,5 | 32,5 | 9,4 | 36 | 7 | M5X12 | 4,3 | 22,3 | 770 | 1170 | 130 |
| IM-MP-1742-1002 | Kafesli Rulman Kapalı - Kısa Tip | SCE 20 VUU | 21 | 27 | 54 | 41 | 35 | 11 | 40 | 7 | M6X12 | 5,2 | 28,3 | 860 | 1370 | 170 |
| IM-MP-1742-1003 | Kafesli Rulman Kapalı - Kısa Tip | SCE 25 VUU | 26 | 38 | 76 | 51,5 | 41 | 12 | 54 | 11 | M8X18 | 7 | 40,4 | 980 | 1560 | 400 |
| IM-MP-1742-1004 | Kafesli Rulman Kapalı - Kısa Tip | SCE 30 VUU | 30 | 39 | 78 | 59,5 | 49 | 15 | 58 | 10 | M8X18 | 7 | 48,4 | 1560 | 2740 | 500 |
| IM-MP-1742-1005 | Kafesli Rulman Kapalı - Kısa Tip | SCE 40 VUU | 40 | 51 | 102 | 78 | 62 | 20 | 80 | 11 | M10x25 | 8,7 | 56,5 | 2150 | 4010 | 1120 |
SCE VUU Series Linear Rulman Selection
This page includes only the SCE VUU Series Bilial Linear Rulman family. Product photos, published technical information and existing model lines are reviewed under the same title. Do not use the similar-looking size of another product family for this product. The full model name and link details should be checked together.
There are 5 source models for this family. The table h, D, W, H, G, A, J, E, S1X1, S2, L, Dynamic Load C N fields are displayed in the way they are published in the source. Each line belongs to its own model; the measurement of different lines should not be combined and the order definition should not be made.
Information needed for the installation and offer
Share the full model code of the existing piece, the photos of the desired unit and the connective surfaces. If a piece is selected new instead, also report the size of the opposite piece. specify that the product is required as a single component, set or processed piece. If you have a specific hole, channel or processing details not shown in the technical drawing, add a measurable picture.
If a value in the technical table is left empty, the measurement for this field should not be assured. Scale calculation is not made through the displayed product photo. Brand and model differences are checked before order; the page does not report the instant stock or the exact delivery time.
In the linear rolling selection, the mile diameter, the external measurements and the assembly layout of the body are assessed together. Open or closed structure, matching with the mile supported and the direction of connection of the flange are separate selection titles. Equalization as the load of the moving group, the mile surface and the working environment should also be indicated. The assembly holes of short and long bodies are not considered the same.
Frequently Asked Questions
What model should I look at?
If you have literal sizes, compare it with the technical drawing of the same product; do not make a review over another series drawing.
What should I send for the offer?
Model code, a piece, the photo of the existing piece and if there is a measurable technical picture is a sufficient beginning. From the contact page You can share your application information.