The long-type Teflon rollers
The long-type Teflon Rulman with a square flange product look, technical data and model options.
Linear Rolls and Bed Cars Return to Product Families
Product images
Teknik çizim ve ölçü işaretleri
Teknik tablo ve model seçenekleri
| İleri stok kodu | Stok Adı | Ürün Adı (Önyükleme Serisi) | Ürün Adı (Standart Serisi) | A | B | C | K | DP | F | T | X | Y | Z | Statik Yükleme (Kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IM-MP-4090-1001 | Kare Flanşlı Uzun Tip | DFPM 12 | - | 12.016-12.043 | 22 | 57 | 32 | 32 | 15 | 9 | 4,5 | 7,5 | 4,1 | 408 |
| IM-MP-4090-1002 | Kare Flanşlı Uzun Tip | - | DFPM 12C | 12.066-12.093 | 22 | 57 | 32 | 32 | 15 | 9 | 4,5 | 7,5 | 4,1 | 408 |
| IM-MP-4090-1003 | Kare Flanşlı Uzun Tip | DFPM 16 | - | 16.016-16.043 | 26 | 70 | 35 | 36 | 20 | 9 | 4,5 | 7,5 | 4,1 | 721 |
| IM-MP-4090-1004 | Kare Flanşlı Uzun Tip | DFPM 20 | - | 20.020-20.053 | 32 | 80 | 42 | 43 | 22 | 11 | 5,5 | 9 | 5,1 | 976 |
| IM-MP-4090-1005 | Kare Flanşlı Uzun Tip | - | DFPM 25C | 25.096-25.129 | 40 | 112 | 50 | 51 | 33 | 11 | 5,5 | 9 | 5,1 | 1.828 |
| IM-MP-4090-1006 | Kare Flanşlı Uzun Tip | DFPM 30 | - | 30.020-30.053 | 47 | 123 | 60 | 62 | 40 | 14 | 6,6 | 11 | 6,1 | 2.319 |
| IM-MP-4090-1007 | Kare Flanşlı Uzun Tip | - | DFPM 30C | 30.096-30.129 | 47 | 123 | 60 | 62 | 40 | 14 | 6,6 | 11 | 6,1 | 2.319 |
The choice of long-type teflon rollers
This page includes only the family of Long-Type Teflon Rulman. Product photos, published technical information and existing model lines are reviewed under the same title. Do not use the similar-looking size of another product family for this product. The full model name and link details should be checked together.
Bu aile için 7 kaynak model kaydı bulunur. Tablodaki Ürün Adı (Önyükleme Serisi), Ürün Adı (Standart Serisi), A, B, C, K, DP, F, T, X, Y, Z alanları kaynakta yayımlandıkları biçimde gösterilir. Her satır kendi modeline aittir; farklı satırlardan ölçü birleştirilerek sipariş tanımı yapılmamalıdır.
Information needed for the installation and offer
Share the full model code of the existing piece, the photos of the desired unit and the connective surfaces. If a piece is selected new instead, also report the size of the opposite piece. specify that the product is required as a single component, set or processed piece. If you have a specific hole, channel or processing details not shown in the technical drawing, add a measurable picture.
If a value in the technical table is left empty, the measurement for this field should not be assured. Scale calculation is not made through the displayed product photo. Brand and model differences are checked before order; the page does not report the instant stock or the exact delivery time.
In the linear rolling selection, the mile diameter, the external measurements and the assembly layout of the body are assessed together. Open or closed structure, matching with the mile supported and the direction of connection of the flange are separate selection titles. Equalization as the load of the moving group, the mile surface and the working environment should also be indicated. The assembly holes of short and long bodies are not considered the same.
Frequently Asked Questions
What model should I look at?
If you have literal sizes, compare it with the technical drawing of the same product; do not make a review over another series drawing.
What should I send for the offer?
Model code, a piece, the photo of the existing piece and if there is a measurable technical picture is a sufficient beginning. From the contact page You can share your application information.