CPC ARC HRC ERC Standard Linear Ray and Vehicles

The four-range basic models of the ARC, HRC and ERC families in the source catalogue.

Overview of the product group

CPC standard ball rail and car group, the ARC, HRC and ERC codes define the separate body orders. The same source catalogue brings together the shapes and measurements of these families. On this page, short, standard, long and flagship options are listed only with the combinations written in the table. Each line is linked to the relevant original catalog page. The same nominal number does not mean that the assembly height and connection layout of different families are the same. When selecting the model, evaluate the series letters and body add-on together.

The cover: CPC source standard catalog printing ARC/HRC/ERC measurement pages; not all additional variants in new printing are included.

Keep the difference between ARC, HRC and ERC

Get only the numerical part of the code seen in a existing machine can direct it to the wrong part. Each of the definitions such as ARC25MN, HRC25MN and ERC25MN is studied by its own measure line. If the height of the top table remains stable, check the total assembly height specifically. If the body shape changes, the wire placement or connection access may also change. If the existing code is not read, share the photo from the top, side and rail section. If the change is considered with another series, it should also be considered not only the length of the car and the rail section and the matching conditions.

M and F body options

The body additions starting with M and F in the source tables separate different connectivity arrangements. Check the volume of the head of the wire and the pressing key to enter while placing a flushed body on the narrow top plate. When the long body is selected, the movement cover at the strok ends of the table is re-evaluated. A short car can cover a smaller area on the same rail; but its application suitability is not only removed from the external dimension. A series, size and body combination not included in the catalogue has not been created automatically. Full code information for the different definition required may be requested.

Four-range ball axis planning

The task of the Bilial guide is to direct the movement along the rail; the driving mechanism is also selected. The use of the wire mile, thread or other driving does not eliminate the need to check the rail and car settings. Show the distance between the line line the rail level applied by the force in the drawing. The connections of the moving plate and the behavior of the rail carrying shas also affect the total result. If the pre-load or accuracy preference is not clear, leave these fields open to the technical demand instead of randomly filling. The final choice is made along with the working conditions and the assembly geometry.

Original technical drawings and paintings

Open the technical pages · PDF 10

Open the technical pages · PDF 9

Open the technical pages · PDF 11

Open the technical pages · PDF 12

Ray and the car location together

In a offer request, write the length of the rail and the vehicle unit together. Show the clarity between the distance to be left between the two cars on the same rail and the parallel rails in the drawing. The total length of the rail is not available strok; the length of the car, the space assigned to the ends, mechanical stopers and other parts affects the net movement distance. The position of the first and last assembly hole is also addressed in the design of the connection surface. If the existing machine is revised, specify the state of the rail carrier surface and the previous changes. This information provides a clearer assessment than a choice made only through the nominal size.

Combining technical drawing with model line

Source documents are published on different dates; this page clearly indicates the scope of the print used. The measurement letters in the drawing must be read together, the headings and units of the same table. Some technical tables are spread to multiple pages. The model link opens the relevant pages together; the printed page number in PDF may be different from the physical page number of the file. The basic model record is not the complete order definition of all the pre-load, accuracy, fraction and material options. Share the full code of the existing piece without a short. The current production and supply of a model in the catalogue is also verified in the supply phase.

Frequently Asked Questions

Why is it not all in the list?

Only combinations with separate model lines were added to the source catalogue.

Is the model code enough for ordering alone?

In addition to the basic code, the rail length, the car unit and the necessary order options should also be determined.

Return to CPC CHIEFTEK product groups · Other rail and car brands