The Servo Capsule
The product look, technical data and model options.
The Capsule Returns to the Products Families
Product images
Teknik çizim ve ölçü işaretleri
Teknik tablo ve model seçenekleri
| İleri stok kodu | Stok Adı | Model | Ød min | Ød max | D | L | L1 L2 | M | Max Açısal Kaçıklık (°) | Max Eksenel Kaçıklık (mm) | Max Tork (Nm) | Max Devir (rpm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IM-MP-4175-1001 | Göbek Sıkma Servo Kaplin | JM-30T | 6 | 14 | 30 | 50 | 18,5 | 3 | 0,9 | +1.0,-1.0 | 25 | 25.000 |
| IM-MP-4175-1002 | Göbek Sıkma Servo Kaplin | JM-40T | 10 | 20 | 40 | 66 | 25 | 4 | 0,9 | +1.2,-1.0 | 34 | 16.500 |
| IM-MP-4175-1003 | Göbek Sıkma Servo Kaplin | JM-55T | 11 | 28 | 55 | 78 | 30 | 5 | 0,9 | +1.4,-1.0 | 120 | 12.200 |
| IM-MP-4175-1004 | Göbek Sıkma Servo Kaplin | JM-65T | 15 | 38 | 65 | 90 | 35 | 5 | 0,9 | +1.5,-1.4 | 320 | 10.500 |
| IM-MP-4175-1005 | Göbek Sıkma Servo Kaplin | JM-80T | 20 | 45 | 80 | 114 | 45 | 6 | 0,9 | +1.8,-1.4 | 650 | 8,650 |
The choice of Servo Capsules
This page includes only the family of the Servo Capsules. Product photos, published technical information and existing model lines are reviewed under the same title. Do not use the apparently similar size of another product family for this product. The full model name and link details should be checked together.
There are 5 source models record for this family. The table's Ød min, Ød max, D, L, L1 L2, M, Max Horse Discharge (°), Max Axel Discharge (mm), Max Tork (Nm), Max Circuit (rpm) fields are displayed in the way they are published in the source. Each line belongs to its own model; the measurement of different lines should not be combined and order definitions should not be made.
Information needed for the installation and offer
Share the full model code of the existing piece, the photos of the desired unit and the connective surfaces. If a piece is selected new instead, also report the size of the opposite piece. specify that the product is required as a single component, set or processed piece. If you have a specific hole, channel or processing details not shown in the technical drawing, add a measurable picture.
If a value in the technical table is left empty, the measurement for this field should not be assured. Scale calculation is not made through the displayed product photo. Brand and model differences are checked before order; the page does not report the instant stock or the exact delivery time.
In the choice of the caplin, report the diameter of two mills separately. the transferred moment, the working circuit, the miles gap and the installation distance are assessed together. the form of connection of the caplin and the shrinking layout must be compatible with the disposal and maintenance access in the machine.
Frequently Asked Questions
What model should I look at?
If you have literal sizes, compare it with the technical drawing of the same product; do not make a review over another series drawing.
What should I send for the offer?
Model code, a piece, the photo of the existing piece and if there is a measurable technical picture is a sufficient beginning. From the contact page You can share your application information.