Type L injection transmitter
Type L Injection Conveyer Visual Gallery
Type L injection carrier is a special carrier system used for the transfer, direction, or transfer of products from plastic injection machines in a specific direction to a different area on the production line. Injection production lines are preferred for the transfer of products from the machine output to the box, control table, packaging area, robot output or a different transport line.
As an advanced engineering, we produce L-type conveyor systems specified for the plastic injection industry. Conveyor size, bandwidth, foot height, transport direction, motor power, speed control system and side barrier details are determined according to your production line's needs.
Where is the type L injection transmitter used?
Type L carriers allow the products that come from injection machines to be transported more regularly in the production area, especially in the front of the machine or in the machine and other areas, it is a useful solution when the products need to change direction.
Main areas of use:
- Do not get the product from the injection machine output
- Transmission of plastic parts into the box
- The product that the robot has left
- Transfer of products to the operator control area
- Transfer of products to the packaging line
- Do not change the direction in the narrow areas
- Traffic and Product Transportation
- Machine front or machine side production regulations
Thanks to the L-type structure, the carrier can be more conveniently placed in the production area and the product flow can be more controlled.
The advantages of the type L
Type L injection carriers provide practical advantage in the production of plastic injection, especially where the area is limited. Products taken from the machine output, move in the desired direction and create order in the production area.
The main advantages:
- It can be used in production areas.
- It will direct the product flow to the desired direction.
- The machine front and the machine side are suitable for applications.
- It can be used on robots or robots.
- It can be produced in a special size.
- PVC band or modular band can be applied.
- Side barrier, direction hair and product holding details can be added.
- Speed control engine system can be used.
- It can be made with rotating or fixed legs.
- It is easily integrated into the production line.
Design of type L suitable for plastic injection lines
The installation of each injection machine, the product output direction and the work area are different, so L-type carriers should be specially designed according to the production line, not according to standard measurements.
In the design phase, the following information is taken into account:
- Location of the injection machine
- The output point of the machine
- The direction of transportation
- The location of the carrier
- Product size and weight
- Robots are not used.
- Band width
- The longness of the carrier
- The work height
- Need a barrier
- The speed control is required.
According to this information, the type L injection carrier is designed in accordance with the production area.
Bands and Six Options
In L type injection carriers, different band and six options can be used according to the structure of the product to be moved. PVC band systems are preferred for light plastic parts, while modular band systems can be used in applications that require more durable surface.
Options that can be used:
- PVC band
- Modular Plastic Bands
- The flat surface band
- The band
- Side Barrier Band System
- The Aluminium Sigma Profile
- Painted steel shape
- Untouched six
- The wheeled foot
- The high foot
Side barrier and direction hair can be added to prevent the product from falling or coming out of the band.
Robot injection Type L of the Conveyor
In the injection machines used by robots, the products are usually left on the carrier by the robot. In this case, the height, width and barriers structure of the carrier must be prepared according to the robot movement area.
A L-type carrier can be used to direct the products to the operator control area, quality control section or packaging line after the point the robot leaves the product. The carrier can be added a barrier, a sensor-based working system or a speed control unit that prevents the product from falling.
Type L injection transmitter
Advanced Engineering produces L-type injection carriers in specific sizes according to the customer's production line. The short part length of the carriers, the long part length, the bandwidth, the height and the turn direction are determined according to the need.
Features that can be added by request:
- Speed control engine
- The inverter system
- The Barrier
- Product Direction Hair
- The wheeled foot
- The high foot
- The emergency stop button
- Sensor work
- Design for the robot output
- Untouched or painted shades
- The Aluminium Profile
In which cases is the type L carrier preferred?
If the products that come from the injection machine need to be transferred in a different direction instead of a straight line, the L-type carrier is a suitable solution, especially in applications where the machine front area is narrow, where the products should be directed side by side or where the products will be controlled after the robot output.
In the lines where the flat carrier does not fit the production area or the product flow needs to change direction, the L-type injection carrier is more convenient.
Information needed for the offer
In order to be able to prepare an offer for the L-type injection carrier, you will only share the following information:
- The injection machine that the carrier will use
- The output point of the machine
- The direction of transportation
- The short part length desired
- The long length of the desired part
- Band width
- The work height of the carrier
- Product size and weight
- Robots are not used.
- Need a barrier
- The preference of band
- Need Speed Control
- Preferred rotating or fixed foot
According to this information, a technical solution and price offer for the L-type injection carrier that fits your production line can be prepared.
Contact us for Type L Injection Converter
If you need a L-type injection carrier for your plastic injection production line, you can share the size and use details with us. As a advanced engineering, we design and manufacture specialized injection carrier that fits your production area.
Advanced Engineering
Number of phone: 0212 549 70 25
WhatsApp: 0506 344 11 03
The email: info@ilerimuhendislik.com
Address: Iqitelli OSB, Dersan Industrial Site S8 Blok No:181 Başakşehir / Istanbul
Interested Conveyor Models
- All the carrier products
- Injection Carrier Group
- Type Z injection transmitter
- Robot with six barriers
- The road transfer
- Metal separator carrier
Product information on other sites
This product group Injection Converter in our site can check, for rolling solutions on the transport line Our Role Carrier Products You can see.
Product photo, machine placement and your basic dimensions Contact with Advanced Engineering You can ask for information for the appropriate carrier for your project.