Injection Conveyor Systems

Injection Conveyor Systems Visual Gallery

In the production of plastic injection, the carrier systems are not just equipment carrying products. A properly designed carrier system; improves production efficiency, reduces the operator's need, preserves the product quality and contributes to the continuous work of the production line.

As a Advanced Engineering, we evaluate the production requirements of each enterprise separately and design injection conveyor systems specific to the project.

We offer the right engineering solutions for your production line instead of ready solutions.

What is the injection transmitter system?

The injection carrier system is the general name of the systems that allow the product out of the plastic injection machine to be safely and controlled to the next stage of the production process.

This system may not consist of a single carrier.

According to the project;

• The integration of robots,
• The cold cold,
• Do not separate the path,
• The protective cabins,
• The sensor systems,
• Different transportation geometry

It can be used in the same system.

Each project should be considered as its own.

Where are the injection transmitter systems used?

Our transportation systems;

• Plastic parts of the car
• Production of white goods
• Medical Products
• The Electrical and Electronic Sector
• Production of packaging
• The cosmetic sector
• Technical Plastic Production
• Production of toys

It is used in many sectors.

which The Conveyor System Suitable for me?

The same system is not suitable for every production line.

When the type of carrier is determined;

• The way out of the machine
• The use of robots
• The temperature of the product
• The weight of the product
• Number of eyes
• The time of circumstance
• Need to separate the road
• Factory settlement
• Point of Delivery

They are evaluated together.

The best system is selected according to this information.

The Injection Conveyor Systems We Manufactured

As Advanced Engineering, we design and produce many transmitter systems for different production needs.

Type of injection transmitter

It is preferable to transfer the products to the operator, the quality control area or the packaging section.

Open injection transmitter

It is used in applications that need to move products to higher levels.

Type L injection transmitter

The systems that carry the product up after creating a short flat section in front of the machine.

Type Z injection transmitter

It is preferred especially in projects that require roadside separation systems and long flat work space.

The six robot carriers

Cartezyen ensures the safe transport of products left from robots.

Makine Altı Konveyör

It allows the products to be taken directly from the under-injection machine.

Cold Conveyor

It allows hot plastic parts to be controlled by ventilated systems.

The road transfer

It is a special system that automatically separates the road from the product to two different boxes.

Special measurement carriers

The standard measurements are designed in place of the standard, completely according to the customer’s production line.

Why Advanced Engineering?

For us, every project is a new engineering work.

We consider the carrier not only as a equipment that carries the product, but as a system that improves the efficiency of the production line.

in the planning process;

• Product analysis is done.
• The production line is being examined.
• The robot system is assessed.
• The ergonomic operator is considered.
• The future capacity is planned.

This approach provides our customers with systems that will work efficiently for many years.

Advanced Engineering Engineer Notes

There is no standard injection carrier system.

Even two factory manufacturers in the same sector may have different needs.

The right approach is therefore not to adapt a ready system to the production line; it is to design a system that is suitable for the production line.

As an advanced engineering, we develop all our projects with this understanding.

Frequently Asked Questions

How to choose the injection carrier system?

The best system is determined by assessing the product measurements, weight, production capacity, robotic use and production line installation.

Can the same carrier be used in each project?

No. Because each production line is different, the system should be designed specifically for the project.

Can I add a cooling system?

Yes. according to the product's need, the ventilated cooling system can be integrated.

Can the road separation system be added?

Yes. according to the product geometry, automatic routing separation systems can be applied.

Do you have a robotic system?

We design systems that are fully compatible with cartezine robots and industrial robots.

Are you producing only in standard sizes?

All the systems we produce are designed specifically according to the customer’s production line.

Evaluate the flow of product as a system

Injection carrier systems are designed when more than one band, the path that the piece follows from the output of the machine to the last box is assessed. Machine sub-collection, the robot's leaving position, the distinction of route and the need for cooling of the product are different tasks on the same line. Each task is determined by the location of the production area that it requires a separate transport point or does not require. The service corridors between the machines and the cover available during maintenance must remain open. The carrier's rolling or fixed footing is also part of this location.

Preparation for offer and application

The product sample or photo, the modeling time, the number of parts out in a circle and the current box size provide useful information for the first assessment. If more than one machine is connected to the same system, the transport order that prevents the mix of products is also planned. Electric power supply, speed control, the way sensors work and the need to communicate with the upper machine are clearly written in the offer scope. Thus, the mechanical settlement and automation expectations complement each other and the necessary settings during production are discussed in advance.

Interested Conveyor Models

• All the carrier products
• Injection Carrier Group
• Type Z injection transmitter
• Type L injection transmitter
• Robot with six barriers
• The road transfer

Product information on other sites

This product group Injection Converter in our site can check, for rolling solutions on the transport line Our Role Carrier Products You can see.

Product photo, machine placement and your basic dimensions Contact with Advanced Engineering You can ask for information for the appropriate carrier for your project.