Machinery • Motion • Production 0212 549 70 25info@ilerimuhendislik.com
🌐 EN
TürkçeEnglishРусскийAzərbaycancaالعربية
Advanced engineering

Open injection transmitter

Open Injection Converter — Open Injection Converter Product and Application View 1

Open Injection Conveyer Visual Gallery

The hole injection carriers are special carriers systems that allow the products from plastic injection machines to be safely transported to different heights.

Depending on the production line location, the product is sometimes transferred to the operator, sometimes to a box, sometimes to the next production station.

Therefore, it may not be possible to use a straight conveyor in each application.

As Advanced Engineering, we design and produce specialized angle injection carriers in different angles that fit your production line.

What is an open injection carrier?

Hole-covered carriers are carriers that allow the product to move up with a specific curve, not only horizontally.

These systems are ⁇

  • The highest level of the product,
  • Transfer to the production line at the top level,
  • Saving the land,
  • Robot production lines

preferred in the practice.

Where is the open carrier used?

Open injection transmitters;

  • Plastic injection facilities
  • Automotive in the industry
  • Production of white goods
  • in the packaging sector
  • Technical Plastic Production
  • in the monthly lines
  • in the packaging systems

is widely used.

The height and the installation of the production line the product will be transported are the most important factors determining the curve of the carrier.

How to determine the hole?

There is no standard angle in the open carriers.

The Conveyor;

  • The product to be transported,
  • The weight of the product,
  • The band type,
  • to the output height,
  • The place to be delivered

The project is specially specified.

It is not appropriate to use the same angle for each project.

Is the L Type of Converter?

No is.

Type L carriers Although the corner is in the group of carriers, not every corner carriers are of type L.

While in some applications only a short rise is enough, in some projects longer-wing transport systems are preferred.

The best geometry of the carrier is determined according to the production line.

Choosing the open band

In the open injection carriers, the band selection should be made according to the characteristics of the product to be moved.

It is not appropriate to use the same type of band for each product.

The most commonly used band types;

in the form.

The product structure is analyzed and the best type of band is determined.

When is the Belted Band used?

If the product is likely to move back in the open carriers, the pulled (paleted) band should be preferred.

The palettes ensure the product is safe to move on the band.

Especially

  • in round products
  • in silindrical parts
  • Products on the surface
  • in the transporter

It is recommended to use the band.

In the products that are likely to rotate, the outlet band becomes almost mandatory.

In which conditions can the PVC tape be used?

If the product is not at risk of swing or rotation on the band, the standard PVC band can be used.

The right products with a flat PVC band Up to 30° Safe transportation can be done.

But the form, weight and surface structure of the product can directly affect this value.

The selection of the band should be considered specifically for the project.

How much should my maximum be?

The open carrier does not have a single standard curve value.

In our advanced engineering practices, in general Conveys up to 45° We design and produce.

In applications that require higher curvature, special engineering solutions are assessed to ensure the product can be safe.

The right choice of the curve;

  • The product structure
  • Type of Band
  • Capacity of transportation
  • The production speed

It is determined according to criteria.

Motor installation

The correct positioning of the engine in the corner carriers is important for the efficient operation of the system.

In standard applications, the engine is preferred to be positioned in the drawing direction.

But some of the lightweight products can be used in some applications to drive.

The engine is designed according to the length of the carrier and transportation conditions.

Advanced Engineering Engineer Notes

In the opening conveyor design, it is not right to focus only on the curved angle.

The behavior of the product on the band, the weight center, the possibility of rotation and the speed of transport should be assessed together.

The right chosen band type and the right curve ensure the system is safe and long-lived.

Where are open carriers used?

The purpose of the use of open injection carriers may be different in each project.

There is no standard use.

The production line structure of the production line;

  • You can transfer the product to the box.
  • The operator can move it to a level that can be comfortable working.
  • It can be packed on the packaging line.
  • You can transfer the product to the next production station.
  • It can be designed according to the point the robot will leave or receive.
  • It can provide product transfer between different levels.

The purpose of use is fully determined according to the needs of the production line.

Technical characteristics

Advanced Engineering Produced Injection Conveyor They are designed specifically for the project.

Main technical characteristics;

  • Type of carrier: open PVC band or modular band
  • Maximum recommended temperature: about 45°
  • Type of band: PVC band / The PVC Band / Modular Band
  • Band thickness: 2 mm or 2.5 mm
  • Six: 23×127 Conveyor Profile or 45×90 Sigma Profile
  • 45×45 Sigma Profile
  • The thumb: Ø60 mm or Ø114 mm
  • Motor: Normal 0.37 kW
  • Reducer: 40 body unfinished type
  • Motor Brands: Volt or Gamak
  • Power: 220V or 380V
  • Speed control: Converter option

All technical features can be changed according to the project.

Information needed for the offer

The following information is sufficient to determine the most appropriate corner carrier.

  • Product Photo
  • Product measurements
  • The Product Weight
  • Injection Machine and Model
  • Robots are not used.
  • The output height
  • The place where the product is moved
  • The desired length of the carrier
  • Production capacity

According to this information, the most suitable system for the project is determined by technical drawing and price offer.

Frequently Asked Questions

Is it used in every corner carrier?

No is.

If the product is not able to roll back, the standard PVC tape can be used.

For the products that are at risk of rotation or swelling, the wiped (paleted) band should be preferred.

How much maximum can be made?

As the project changes, we are generally designing up to 45°-wing carriers in our applications.

Is the engine always on the top?

No is.

Most of the engine is positioned in the direction of the pull.

But some of the projects where light products are moved can also be applied in the direction of drive.

Is the open carrier used only to carry the product into the box?

No is.

The purpose of use is fully determined according to the production line.

It can be used in many applications, such as product delivery to the operator, packaging line, assembly line, robotic integration or product transfer to different boxes.

Interested Conveyor Models

Product information on other sites

This product group Injection Converter in our site can check, for rolling solutions on the transport line Our Role Carrier Products You can see.

Product photo, machine placement and your basic dimensions Contact with Advanced Engineering You can ask for information for the appropriate carrier for your project.

LET’S PLAN TOGETHER

The next step for your production line.

Share your dimensions, technical drawing or requirements.

Let's Discuss Your Project ↗